It is currently Tue Oct 08, 2024 2:56 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Tue Apr 08, 2014 7:29 pm 
Offline

Joined: Thu Apr 05, 2012 10:40 pm
Posts: 14
Hi,

Is there any updated timetable, or do there exist development versions which have incorporated the 3-d central gas models alluded to in the current explanatory supplement?

Quote:
"nHII: The ionized component currently calculated using a cylindrically symmetrical model based on NE2001
by Cordes et al. (5), Eq.(6) and Table 1. More sophisticated 3D model for the inner Galaxy is developed by
Taylor & Cordes (54) and outer Galaxy by Lazio & Cordes (19). Galactic center region has been considered
by Lazio & Cordes (20). These latter models can be used in future for 3D calculations. A revised scale-height
using more pulsar DMs was determined by Gaensler et al. (2008) which has been implemented as option to
replace this component in NE2001. more details required."


Sincerely,

-Eric


Top
 Profile  
 
PostPosted: Tue Apr 08, 2014 11:16 pm 
Offline

Joined: Wed May 17, 2006 7:02 am
Posts: 285
Location: MPE Garching
You mean for HII? so far not, only the new scale-height alluded to is already included in http://sourceforge.net/projects/galprop
The documentation here is certainly in need of improvement (like most of the Explanatory Supplement).

_________________
Andy Strong, MPE


Top
 Profile  
 
PostPosted: Mon Apr 14, 2014 7:10 pm 
Offline

Joined: Thu Apr 05, 2012 10:40 pm
Posts: 14
Thank you for the update. I do have two other questions that you may be able to help with.

Is it possible to use higher resolution gas maps for computing the pion emissivity? Or to obtain the quarter degree maps that are used by webrun? I have custom modifications to the GALPROP code and cannot use the online interface.

I am also somewhat confused by the descriptions of how the pion_decay skymap is computed. The gas distributions are cylindrically symmetric in e.g. Moskalenko et al 2002, but clearly the pion decay skymap contains gas structure that would not be part of this model and are presumably based upon the gas surveys. Could you briefly explain how this actually works, especially in the context of a 3-d simulation? I don't quite understand where the 3-d gas models are used and where the surveys are used in the context of pion decay.

EDIT: Question two is answered in detail at http://iopscience.iop.org/0004-637X/750/1/3/pdf/apj_750_1_3.pdf


Last edited by erccarls on Mon Apr 14, 2014 8:52 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Mon Apr 14, 2014 11:45 pm 
Offline

Joined: Wed May 17, 2006 7:02 am
Posts: 285
Location: MPE Garching
Higher resolution maps would probably work if they were in the right format. For the quarter-degree maps, you have to ask Gulli Johannesson who made them.

For the gamma maps, the principle is that while CR are axisymmetric in 2D, the gas rings do have plenty of structure since they are based on surveys. So the gas structure is accounted for even if the CR structure (e.g. spiral arms) is absent.

_________________
Andy Strong, MPE


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group